Template:Control Point Timing/doc

This template will generate a control point breakdown for up to six points. Using values from the raw map info. The entity trigger_capture_area contains two values needed, area_time_to_cap and team_numcap_2/3 The value for area_time_to_cap is used for the AREAX parameters, and the team_numcap_2/3 is used for the TEAMX parameters.

There are 10 sections available for this template, 0 though 9, and the multiplier count can be shown by setting ROWS, which defaults to 4.

For example, using values for Badlands:

{{Control Point Timing
| MAPNAME = Badlands
| NAME1 = Control Points 1 & 5
| AREA1 = 1
| TEAM1 = 1
| NAME2 = Control Points 2 & 4
| AREA2 = 8
| TEAM2 = 1
| NAME3 = Control Points 3
| AREA3 = 10
| TEAM3 = 1
| ROWS = 8
}}

Generates

Badlands
Control Point	Multiplier	Seconds
Control Points 1 & 5	×1	2 .000
	×2	1 .333
	×3	1 .091
	×4	0 .960
	×5	0 .876
	×6	0 .816
	×7	0 .771
	×8	0 .736
Control Points 2 & 4	×1	16 .000
	×2	10 .667
	×3	8 .727
	×4	7 .680
	×5	7 .007
	×6	6 .531
	×7	6 .171
	×8	5 .887
Control Points 3	×1	20 .000
	×2	13 .333
	×3	10 .909
	×4	9 .600
	×5	8 .759
	×6	8 .163
	×7	7 .713
	×8	7 .359